Table of Contents
Advertisement
Quick Links
INSTALLATION & OWNER'S MANUAL
Direct Vent Gas Insert 739-72ILN / 739-72ILP
with Contemporary Black Front & Logs
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
!
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
— Do not store or use gasoline or other
fl ammable vapors and liquids in the
vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS
▪ Do not try to light any appliance.
▪ Do not touch any electrical switch; do
not use any phone in your building.
▪ Leave the building immediately.
▪ Immediately call your gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions.
▪ If you cannot reach your gas supplier,
call the fi re department.
— Installation and service must be
performed by a qualifi ed installer,
service agency or the gas supplier.
4004616-10
©2018, Miles Industries Ltd.
Legend G3
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Please read this manual
BEFORE
operating this appliance.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
This appliance may be installed in an after-
market permanently located, manufactured
(mobile) home where not prohibited by local
codes.
This appliance is only for use with the type
of gas indicated on the rating plate. This
appliance is not convertible for use with
other gases, unless a certifi ed kit is used.
This appliance is a domestic room-heating
appliance. It must not be used for any other
purposes such as drying clothes, etc.
This appliance is suitable for installation in
a bedroom or bed sitting room.
Ce guide est disponible en français sur demande.
installing and
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Miles Valor Legend G3
Summary of Contents for Miles Valor Legend G3
- Page 1 Follow the gas supplier’s instructions. ▪ If you cannot reach your gas supplier, call the fi re department. — Installation and service must be performed by a qualifi ed installer, service agency or the gas supplier. 4004616-10 ©2018, Miles Industries Ltd.
-
Page 2: Table Of Contents
Spare Parts............34 The information contained in this installation manual is believed to be correct at the time of printing. Miles Industries Ltd. reserves the right to change or modify any information or speci- fi cations without notice. Miles Industries Ltd. -
Page 3: Safety And Your Fireplace
Safety and Your Fireplace SAFETY AND YOUR FIREPLACE Read and understand all instructions carefully before Do not use this heater as a temporary source of starting the installation. Failure to follow these instal- heat during construction. lation instructions may result in possible fi re hazard and Due to the high temperature, the appliance should be will void the warranty. - Page 4 Safety and Your Fireplace Read and carefully follow all safety warnings and operating instructions contained in your owner’s manual Replacement manuals are available by contacting the Valor Service Department at 1-800-468-2567 or visit www.valorfi replaces.com. FOLLOW THESE IMPORTANT CHILD SAFETY PRECAUTIONS AND RECOMMENDATIONS Parts of your Valor Fireplace become extremely hot while in operation.
- Page 5 SAFETY AND YOUR FIREPLACE This manual and particularly the preceeding and following pages contain very important information regarding the safe operation of your fi replace as well as maintenance instructions. Read carefully before operating your fi replace and pay special attention to the safety warnings. A heating gas appliance does require safe handling.
-
Page 6: Introduction
INFORMATION Thank You ... Operating Your Fireplace for the First Time For purchasing a Valor by Miles Industries. Your new When operating your new fi replace for the fi rst time, radiant gas heater is a technical appliance that must some vapors may be released due to the burning of be installed by a qualifi... -
Page 7: Operating Your Fireplace
OWNER’S Operating Your Fireplace INFORMATION Fireplace Control Devices In the unlikely event that you cannot turn off your fi replace with the remote control handset, turn off gas Your fi replace is operated by a supply and call your dealer for service assistance. remote control handset which can be programmed to function automatically—... -
Page 8: Using The Remote Control
OWNER’S Using the Remote Control INFORMATION Your fi replace remote control helps you get the comfort, convenience and aesthetics you want from your gas fi replace. The remote controls your fi replace in diff erent ways. IMPORTANT: BEFORE YOU BEGIN, please note that on this system, the settings of time, temperature and automatic ON/OFF can only be programmed when the function display is fl... - Page 9 OWNER’S Using the Remote Control INFORMATION Programming time and temperature You can set your fi replace to come on before you wake up and turn off after you leave and then, turn on again just before you come home and turn off after going to bed. You can leave it like this for the heating season.
-
Page 10: Kits & Accessories
OWNER’S Kits & Accessories INFORMATION Required Kits Optional Accessories Information accurate at the time of printing and subject Information accurate at the time of printing and subject to change without notice. to change without notice. Venting Components Outer Surrounds and Trims Approved venting accessories as listed in this manual See your dealer for your choice of Outer Surrounds —see section Approved Venting Components—and... -
Page 11: Lighting Instructions
OWNER’S Lighting Instructions INFORMATION FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance has a pilot, which must be lighted by hand. When lighting the pilot, follow these instructions exactly. -
Page 12: Servicing & Maintenance
OWNER’S Servicing & Maintenance INFORMATION Servicing Your Fireplace We recommend having your fi replace serviced every year. Contact your supplier quoting the model number. It will be helpful if the appliance’s serial number can also be quoted. These numbers are on the information card. -
Page 13: Cleaning Your Fireplace
Dealers have tried various cleaning products with varying results. The following are recommendations only and are not meant to guarantee results. NOTE: This is a problem beyond Miles Industries’ control and is not covered under warranty. • Clean the glass regularly as soon as you notice the buildup (white fi... - Page 14 OWNER’S Servicing & Maintenance INFORMATION To refi t the window: 4. Then, pull out the top and bottom of the window and release it to insure the springs return it. DANGER 5. Apply firm hand pressure around the window The window unit must be correctly installed, frame to ensure the window is sealed tight fastened and sealed after servicing or serious against the firebox.
-
Page 15: Checking Pilot And Burner Flames
OWNER’S Servicing & Maintenance INFORMATION Checking Pilot and Burner Flames The appliance area must always be kept clear and free from combustible materials, gasoline and other A periodic check of the pilot and burner fl ames should fl ammable vapors and liquids. Inspect the vent terminal be made. -
Page 16: Replacing Batteries
OWNER’S Servicing & Maintenance INFORMATION Replacing Batteries 2. Slide and remove the receiver cover. 3. Replace the batteries with 4 AA alkaline batteries. WARNING 4. Replace the cover. DO NOT ATTEMPT TO CHANGE THE BATTER- 5. Put the receiver back in its position pushing it in so IES WHILE THE FIREPLACE IS STILL HOT! Let it attaches to the Velcro tab. -
Page 17: Specifi Cations
QUALIFIED Specifi cations INSTALLER Approval & Codes *High Altitude Installations This appliance is certifi ed to ANSI Z21.88-2016 / CSA I nput ratings are shown in BTU per hour and are 2.33-2016 American National Standard / CSA Standard certifi ed without deration for elevations up to 4,500 feet for Vented Gas Fireplace Heaters for use in Canada (1,370 m) above sea level. -
Page 18: Overview
QUALIFIED Overview INSTALLER This appliance may ONLY be installed in an existing unaltered, functioning solid-fuel burning fi replace with a working fl ue and constructed of non-combustible material. DO NOT install into combustible construction. This appliance is NOT APPROVED for installation with a zero clearance kit. WARNING WARNING Some materials or items, although... -
Page 19: Dimensions
QUALIFIED Dimensions INSTALLER 28-5/8” (727 mm) 19-1/2” (495 mm) 12 - 14” (305 - 357 mm) Varies with outer trim options Optional Outer Trim or Surround sold separately 9-3/8 - 11-3/8” (238 - 289 mm) Varies with outer trim options 20”... -
Page 20: Clearances
QUALIFIED Clearances INSTALLER WARNING WARNING Some materials or items, although safe, may discolor, shrink, warp, crack, peel, and so on because of the heat produced by the fi replace. Avoid placing candles, paintings, photos, and other items sensitive to heat around the fi replace. Combustible Mantel Clearances Mantel 1”... -
Page 21: Venting
QUALIFIED Venting INSTALLER Typical Vent Installation See the Approved Venting Components list on page 32 of this manual. Vent Location The vent terminal must be located through the roof. This direct Terminal Cap vent appliance is designed to operate when an undisturbed airfl... -
Page 22: Existing Fireplace Preparation
QUALIFIED Installation Planning INSTALLER Only qualifi ed licensed or trained personnel should install this appliance. Installer—READ THIS FIRST 12. Refi t window. 1. YOU NEED TO KNOW FROM THE HOMEOWNER what accessories (surround, 13. Put batteries in receiver and remote control etc.) will be installed with this fi... -
Page 23: Installation
QUALIFIED Existing Fireplace Preparation INSTALLER Gas Line Routing Combustible Mantels Plan the routing of the gas line before proceeding. Combustible mantel clearances must conform to those Utilize the existing hole for the gas line. If the factory- required for the original solid-fuel fi replace into which built fi... -
Page 24: Remove Window
QUALIFIED Installation INSTALLER Remove Window The window is held in place by four spring-loaded bolts, two at the top and two at the bottom. 1. To remove the window, turn each bolt a quarter turn to disengage the bolt pin. 2. -
Page 25: Connect Venting
QUALIFIED Installation INSTALLER Connect Venting IMPORTANT: This appliance’s venting system is room sealed and therefore, does not require room air to be used in the combustion process. 1. Rough-in two 3” diameter vent liners into the existing chimney system from the roof. Be careful not to tear or damage the liners in the process. -
Page 26: Connect Gas Supply
QUALIFIED Installation INSTALLER Connect Gas Supply Pressure Test Points The gas supply inlet connection is a 3/8” NPT female The minimum supply pressure is given in the section connector and is located on the left hand side of the Specifi cations of this manual—page 17. control valve. -
Page 27: Install Ceramic Logs
QUALIFIED Installation INSTALLER Install Ceramic Logs Place it on the right pin located on the rear log. Rest its other end in the crook of the front right log. Unpack the ceramic logs very carefully to avoid damaging the fragile material. Install the logs as shown below. Please note that the position of the logs is critical to ensure proper performance of the appliance. -
Page 28: Refi T And Check Window
QUALIFIED Installation INSTALLER Refi t and Check Window DANGER 1. To refi t the window, place the window against the The window unit must be correctly installed, fi rebox’s opening frame. Make sure that the wider fastened and sealed after servicing or serious part of the window frame is at the bottom. -
Page 29: Connect Remote Control Receiver
QUALIFIED Installation INSTALLER Connect Remote Control Receiver CAUTION CAUTION DO NOT PUT BATTERIES IN THE REMOTE DO NOT USE a screwdriver or other metallic object to CONTROL RECEIVER until the wires are con- remove the batteries from the receiver or the handset! nected to the burner control unit as short- This could cause a short-circuit to the receiver. -
Page 30: Check Operation
QUALIFIED Installation INSTALLER Check Operation Depending of fuel bed used, altitude and other considerations, the fl ame picture may be improved by Turn the fi replace fl ame up and down using the adjusting the aeration. The need for adjustment should remote control to confi... -
Page 31: Install Front And Barrier Screen
2. Hook the lower panel to the bottom of the front under the barrier screen. The 772 Contemporary Front is designed to be used on the Valor Legend G3 heater 739-72 along with an outer surround trim (supplied separately). The Contemporary Front fi ts within the outer surround trim and clips onto the standard mounting brackets supplied with the heater. -
Page 32: Approved Venting Components
QUALIFIED Approved Venting Components INSTALLER... -
Page 33: Warranty
1. Extended Warranty Coverage For a period of up to ten (10) years, Miles Industries Ltd., (the “Company”) or its appointed distributor will at its option pay the initial owner for the repair of, or will exchange the following parts or components which are found to be defective in material or workmanship... -
Page 34: Spare Parts
OWNER’S Spare Parts INFORMATION Part Part Code Description Code Description Number Number Exhaust Slide Assembly 4001133 Module Gasket—Left 4000181 Exhaust Slide Gasket 4001662 Olive Nut for Pilot Pipe 220K913 Fan Closure Plate 4001136 Pipe—Valve to Pilot 4001838 Port Cover 4001820 Thermal Switch Retainer 4001519 Log Support... - Page 35 OWNER’S Spare Parts INFORMATION Natural gas Propane gas Natural Propane gas 40a, 40b...
- Page 37 Serial Number: Date Purchase (yyyy-mm-dd): Dealer: Customer Information First Name: Last Name: Contact Information Email: Mailing Address Address: City: Province/State: Postal/Zip Code: Country: Cut out page, fi ll information, and mail to Miles Industries Ltd. Online Warranty registration at www.valorfi replaces.com...
- Page 38 Tape Shut Fold here Postage needed Miles Industries Ltd. 190 - 2255 Dollarton Highway North Vancouver, BC V7H 3B1 Canada Online Warranty registration at www.valorfi replaces.com Thank you for choosing a Valor Product...
Need help?
Do you have a question about the Valor Legend G3 and is the answer not in the manual?
Questions and answers