Samsung RF21 Series User Manual page 18

Setting up your french door refrigerator
Reassembling the fridge door
1. Insert and tighten the screw into
the left and right middle hinges
with a philips screwdriver(+).
4. Place the hole in the bottom of
the left d oor over the middle
hinge.
ground
wire
7. Insert and tighten the ground
screw into the left and right
upper hinges with a philips
screwdriver(+).
18_ Setting up your french door refrigerator
NW2-FDR_DA68-01845C-26_EN.indd 18
2. Insert and tighten the 2 hex head
bolts into the left and right middle
hinges with an allen wrench(3/16").
5. Insert the left upper hinge shaft
into the hole on the corner of the
fridge door.
8. Connect the electronic wire on
the top of the refrigerator.
3. Replace the middle hinge cap.
6. Insert the upper hinges into the holes
at the top of the door.
Insert and tighten the 3 hex head
bolts into the left and right upper
hinges with a socket wrench.
Top Table
9. Position the top table in place.
Insert and tighten the 3 screws
into the top table with a philips
screwdriver(+).
2019-01-22 4:41:49