Advertisement
Quick Links
KBA600, KBA1000, KBA1800, KBP600, KBP1000, KBP1800 , KBX600, KBX1000 & KBX1800
Operation Manual
KwiKool Bio Air, Bio Plus & Bio Max Series
Operation Manual
Table of Contents
Section I / Unit Components - Page: 3
Section II / Description
Section III / Assembly and Installation - Page: 4-6
Section IV / Operational Safeguards - Page: 6
Section V / System Operation - Page: 7-9
Section VI / Built In Safeguards - Page: 9-10
Section VII / Application Requirements - Page: 10-11
Section VIII / Maintenance - Page: 11
Section IX / Utilizing Your KBA, KBP & KBX System - Page: 11
Section X / Fault Codes - Page 12
Section XI / KBA, KBP & KBX Troubleshooting Guide - Page: 12-15
Appendix:
Part A: HEPA Filter, Part B: Ultra Violet Light
Part C: Charcoal Filter, Part D: KBX Ionizer
Before installing and using your KwiKool Bio Air (KBA), KwiKool Bio Plus (KBP) or KwiKool Bio Max
(KBX) system, read this manual carefully for instructions and proper usage and all safeguards. This
manual should be retained for future reference.
Advertisement
Related Manuals for KwiKool KBA600
Summary of Contents for KwiKool KBA600
- Page 1 Part C: Charcoal Filter, Part D: KBX Ionizer Before installing and using your KwiKool Bio Air (KBA), KwiKool Bio Plus (KBP) or KwiKool Bio Max (KBX) system, read this manual carefully for instructions and proper usage and all safeguards. This...
- Page 2 600 model is 8” the 1000 model is 10” and the 1800 model is 12”. All models can use the optional 12 inch duct and collar (not included with the KBA600 or 1000 unit and is designed for use with CK12S ceiling kit or 12” ducting). Ducting to outside the space is necessary to create a negative pressure.
- Page 3 III / Assembly and Installation- A. KBA600, KBA1000 and KBA1800 Arrive from the factory ready to operate after it is removed from the packing and the cabinet protective film is removed, remove the film by pulling down from the top of the cabinet to expose the stainless steel surfaces. Only attachment of the collar, optional ceiling kit or user supplied ducting is required.
- Page 4 Do not touch your system with wet hands. D. To insure your KwiKool Bio Air system is stable, the floor on which the system is to be place should be level, free of vibration and strong enough to support the weight of your model.
- Page 5 H. Do not insert your hand or any other object into the air supply. Do not operate your KwiKool Bio Air system with its service doors open. J. If your KwiKool Bio Air system makes abnormal noises or vibrations, call KwiKool at 1-800-594-5665.
- Page 6 B), or use the factory supplied flange on the top of the system by connecting duct to the flange and directing it out of the space (25’ Max). The KBA600 is equipped with an eight inch collar and the KBA1000 is equipped with a ten inch collar, the KBA1800 is fitted with a 12”...
- Page 7 C. Apply Electrical Power - Once power is engaged by plugging in your system, your KBP or KBX display will come alive and show the current room temperature. The unit is set to OFF and the fan is set to high. If your system is not indicating that power is supplied after plugging it in, refer to the troubleshooting guide in this manual.
- Page 8 Defaults back to 0 Reset VI / System Operation KBA Only A. Control panel for KBA600 KBA1000 & KBA21800- The control panel of these systems is comprised of 2 rocker switches and an indicator light to alert operators of scheduled maintenance.
- Page 9 VII / Built in Features and Safeguards KwiKool is proud to provide its customers with high quality features and safety devices that are not found in most other brands. A. Automatic restart- Your KBA KBP & KBX systems will automatically restart if power is lost and then restored.
- Page 10 E. Locking casters-To prevent un-intended movement of the system, locking casters are installed on the front of all KwiKool Bio Air systems. Move the system to a level surface and move the locks on the casters to the ON position. Move to OFF when moving the system.
- Page 11 Re-install filters and close the filter door - Rotate the screws clockwise to securely close the door. C. Charcoal filter installation for all KwiKool Bio Air systems- This section covers the set up and installation of the charcoal filter in the field, users that have ordered the charcoal filter installed from the...
- Page 12 X / Fault Codes KBP & KBX Only KwiKool Bio Air Plus and Bio Air Extreme Systems display a fault code to indicate that maintenance is needed on your system; the nature of the maintenance is displayed on the touchscreen panel. See the troubleshooting guide later in this manual for further information.
- Page 13 F1 = System is being operated in an ambient temperature below 28 degrees F. System still operates and – -- replaces the room temperature. Resets automatically when temperature rises above 28 F. XI / KBA, KBP & KBX Troubleshooting Guide Fault on KBP &...
- Page 14 Control is blank on KBP or KBX systems, on KBA systems the rocker switch is not lit red. Possible Cause Power circuit is not engaged, system is not plugged in. Possible Solution Check source power breaker and verify incoming power to connector, plug the system into the proper outlet. Call 1-800-KWIKOOL for assistance.
- Page 15 Possible Solution Confirm HEPA filter is installed and activating the safety switch, refer to the maintenance section for bulb replacement steps, confirm your system is equipped with UV lights, call 800-KWIKOOL if switch is depressed and not activating the UV lights.
Need help?
Do you have a question about the KBA600 and is the answer not in the manual?
Questions and answers