General Settings - Philips 65PUS7101 User Manual

To set the TV in Energy Saving...
1 - Press , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Energy Saving, the Picture Style is set to
Standard automatically.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Screen Off
If you only listen to music, you can switch off the TV
screen to save energy.
To only switch off the TV screen...
1 - Press , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Screen Off. The screen will switch off.
4 - Press  (left) repeatedly if necessary, to close
the menu.
To switch the screen back on, press any key on the
remote control.
Light Sensor
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, together with
Ambilight, to the lighting conditions of the room.
To activate the light sensor...
1 - Press , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to
enter the menu.
3 - Select Light Sensor. The icon  is shown in
front of Light Sensor when it is active.
4 - Press  (left) repeatedly if necessary, to close
the menu.
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1 - Press , select All Settings and press OK.
2 - Select Eco Settings and press  (right) to enter
the menu.
3 - Select Switch Off Timer.
4 - Press the arrows  (up) or  (down) to adjust
the value. The value 0 deactivates the automatic
switch off.
5 - Press  (left) repeatedly if necessary, to close
the menu.
12.6

General Settings

USB Hard Drive
To set up and format a USB Hard Drive...
1 - Press , select All Settings and press OK.
2 - Select General Settings and press  (right) to
enter the menu.
3 - Select USB Hard Drive.
4 - Select Start, then follow the instructions on
screen.
5 - Press  (left) repeatedly if necessary, to close
the menu.
For more information on how to install a USB Hard
Drive, in Help, select Keywords and look up
Hard Drive, installation or Installation, USB Hard
Drive.
USB Keyboard Settings
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of
the USB connections on the TV. When the TV
detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard layout first, you
can select a secondary Latin keyboard layout.
To change the keyboard layout setting when a layout
was selected...
1 - Press , select All Settings and press OK.
2 - Select General Settings and press  (right) to
enter the menu.
3 - Select USB Keyboard Settings to start the
keyboard setup.
59
USB