LG LHTNS2403 Series Owner's Manual page 12

Door
Closer/
Stop
Reverse the Door Closer/Stop by flipping it over. Place it
on top of the Hinge Pin Insert Bracket, and tighten both
down with the screw. Tighten the Hinge Pin Bracket to the
door.
NOTE: The Door Closer Stop is only presented on some
models.
Hinge
Pin Bracket
Hinge Pin
Insert
With a flat-head screwdriver, carefully pry off and remove
the cover over the screw holes on the left side of refrig-
erator housing.
Remove the outer lower Decorative Screw from the hous-
ing at the area between the freezer and refrigerator doors.
(You will need this hole for the Middle Hinge Bracket.)
REFRIGERATOR INSTALLATION
Flip the Middle Hinge Bracket, (flange will now be on top)
position it on left side of the refrigerator and reattach with
two bolts and a Phillips screwdriver. Place the refrigerator
door down over the pin on the bottom hinge. Place the
washer between the refrigerator door and middle hinge
Hinge
and re-attach Hinge Pin to Hinge Bracket with a ¼"
Pin Bracket
socket wrench.
NOTE: Bracket has been flipped, but Hinge Pin stays in
Hinge Pin
the same orientation with its hexagonal end facing
Insert
upward.
Door
Closer/
Insert the Decorative Screw into the outer hole on the
Stop
right side of the housing. Attach cover on the right side.
Cover is force-fitted.
REATTACHING THE DOORS
Place the freezer door down over the Hinge Pin on the
Middle Hinge Pin Bracket.
Place the Upper Hinge Pin on top of the freezer door and
line up the Upper Hinge with holes on top of the refrig-
erator. Use the three bolts to replace the Hinge.
11
Flange
Middle Hinge
Bracket
Decorative
Screw