Assembly; Installing The Wall Mount & Tool Storage Station; Installing The Optional Febreze Filter - Bissell POWERGLIDE PET SLIM 3070 Series Quick Start Manual

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Connect the Extension Wand
to Motorized Floor Cleaning
Foot. You'll hear a "click" when
they're connected.
Installing the Wall Mount & Tool Storage Station
Go to support.BISSELL.com for more tips and video instructions.
1.
Insert tool holder on the
side of the wall mount.

Installing the Optional Febreze Filter

Go to support.BISSELL.com for tips on maintaining and replacing your vacuum filter.
1.
To change the filter, turn
OFF machine and remove Dirt
Tank from the Hand Vacuum
by pressing the Tank Release
Button and sliding the tank out.
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
2.
Connect the Hand Vacuum
to the Extension Wand. You'll
hear a "click" when they're
connected.
2.
Screw the wall mount into
a wall (a wall stud will provide
best support). Ensure the
mount is high enough up off
the ground for the vacuum to
hang comfortably.
2.
Twist top to remove filter
frame from the separator.
Remove the filter from the
filter frame housing.
3.
Wrap cord on the side of
the product where the cord
clips are located.
3.
Hang the vacuum on the
center storage piece and
insert tools on the tool holder
provided.
3.
Replace with the Febreze
filter and reinstall the filter
frame.
BISSELL.com 3