Intended Use - HAZET-WERK Twin Turbo 9012 MTT Operating Instructions Manual

1. Owner's
liability
• The tool was developed and manufactured
according to the technical norms and stan-
dards valid at the time and is considered to
be operationally reliable. Nevertheless, the
tool may present a danger when it is used
in an incorrect or inappropriate way or by
non-qualified personnel. Please make sure
that any person using this tool or carrying
out maintenance work carefully reads and
fully understands these operating instruc-
tions before using the tool.
• Any modification of the tool is strictly
forbidden.
• All safety, warning and operating instruc-
tions on the tool must be kept legible at all
times. All damaged labels or stickers must
be replaced immediately.
• All specified set values or ranges must be
observed.
• Always keep the operating instructions
close to the tool.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regularly.
12
2
For your safety
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!
^ hazet.com • ] info@hazet.de

2. Intended Use

Operational reliability is only guaranteed if
the tool is used as intended in accordance
with the information in the operating instruc-
tions. In addition to the safety advice in these
operating instructions, the general safety
regulations, regulations for the prevention of
accidents and regulations for environmental
protection valid for this tool's application
range must be observed and respected.
Use and maintenance of the tool must always
comply with relevant local and national regu-
lations.
• The HAZET Twin Turbo impact wrench is a
handy tool for handiwork and DIY jobs.
• It is particularly suitable for work in hard-
to-access areas on motor vehicles, motor-
cycles, agricultural equipment or assembly
lines.
• Maximum efficiency due to the ground-
breaking HAZET Twin Turbo technology
enables high torques with compact design.
• Innovative 8-blade air motor with 25% hig-
her impact performance ensures maximum
torques.
• Long service life and high efficiency in
industrial and automotive applications.
• Compact design optimised for work in
confined spaces
• Any deviation from the intended use
and/or any misapplication of the tools
is not permitted and will be considered
improper use.
• Any claims against the manufacturer and/
or its authorised agents because of damage
caused by improper use of the devices are
void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.