Table of Contents
Advertisement
Available languages
Available languages
- teChnICal InDICatIons oF usIng -
IMPORTANT: the equipment, if used like a device for transmission of alarms of a CIE, can be connected only
if:
- the CIE complies to EN 50131-1 and EN 50131-3 (Grade 1)
- the terminals "1,2", connected to the outputs of a CIE, are programmed as "balanced inputs", and confi-
gured to send vocal calls/SMS for intrusion and power failure;
- the terminal "3" is configured like "output of type T" (tamper) and connected to an input always active
controlled from the CIE;
- the terminal "4" is configured like "output of type G" (GSM failure) and connected to an input controlled
form the CIE;
- the terminal "5" can be used with a CIE that has the function of "robbery" (in this case the terminal con-
nected to an output of a CIE, must be progammed like "balanced input" and configured to send vocal calls/
SMS for robbery) or with a CIE that allows access at level 3 without the authorization of users at level 2.
NOTE: for CIE with grade upper to 1 and/or when there are 2 or more inputs like robbery, the device of tran-
smission of alarms can not be used (availability in inputs/outputs insufficient).
- InDex -
PROGRAMMING MENU FROM KEYBOARD - 2
PROGRAMMING MENU FROM KEYBOARD - 3
MENU OF IN / OUT LINES
www.amcelettronica.com
NAMES
page 03
page 04
page 05
page 06
page 07
page 08
page 09
page 09
page 10
page 10
page 10
page 10
page 10
page 11
page 11
page 11
page 12
page 13
page 13
page 14
page 15
page 15
page 16
page 17
page 20
VOX-4W v. 1.0
Advertisement
Table of Contents
