Doro 6040 Manual page 51

Hide thumbs Also See for 6040:
Table of Contents

Advertisement

Standby time decreases
Battery charge capacity
too low
Too far from base sta-
tion, phone is constantly
searching for signal
Failure to place or receive calls
Call barring activated
PIN code not accepted
Wrong PIN code entered
too many times
SIM card error
SIM card damaged
SIM card incorrectly
installed
SIM card dirty or damp
Failure to connect to network
SIM card invalid
No coverage of GSM
service
Weak signal
Too far from base
station
Network congestion
Echo or noise
Regional problem from
bad network relay
English
Install a new battery.
Searching the network consumes battery power.
Find a place with a stronger signal, or temporarily
turn off the phone.
Deactivate call barring. If this does not solve the
problem, contact your service provider.
Enter the PUK code to change the PIN code, or
contact your service provider.
Check the condition of the SIM card. If it is dam-
aged, contact your service provider.
Check the installation of the SIM card. Remove
the card and reinstall it.
Wipe the contact surfaces of the SIM card with a
clean cloth.
Contact your service provider.
Contact your service provider.
Try again from another location.
Try calling at a later time.
Hang up and redial. This may switch to another
network relay.
45

Advertisement

Table of Contents
loading

Table of Contents