Yamaha TG77 Installation Manual page 14

Yamaha TG77 LCD Replacement Guide
Fig. 14 - Knob Locations on Front Panel Shown in Red
Step 6:
Remove the front panel.
In order to remove the front panel you will need to remove the Data
Entry knob and the Volume knob. The volume knob consists of two
knobs, a top portion and a bottom portion. The top portion can be
easily pulled off from the front. The bottom portion needs to be pushed
from the back in order to be pulled off from the front. The Data Entry
knob can also be easily pulled off from the front.
There are 8 screws that hold the front panel in place. Remove the 3
screws from the top, the locations are shown in Fig. 15 on page 15.
Remove a screw from each side, the locations are shown in Fig. 16 on
page 15. Remove the 3 screws on the inside, the locations are shown in
Fig. 17 and 18 on page 16. Now the front panel can be removed.
14
produced by: glitchscience.com
2022©