Bosch 0 601 387 504 Original Instructions Manual page 14

14 | English
(3) Complete dust box (Microfilter system)
(4) Handle (insulated gripping surface)
(5) Sanding pad
a)
(6) Sanding sheet
(7) Screws for sanding pad
Technical Data
Random orbit sander
Article number
Orbital stroke rate preselection
Rated power input
No-load speed n
0
No-load orbital stroke rate
Orbit diameter
Sanding disc diameter
Weight according to EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 5.0 m/s , K = 1.5 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
Selecting the Sanding Sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate:
Material
– Paint
– Varnish
– Filler
– Bodyfiller
1 609 92A 7TD | (05.07.2022)
(8) Extraction outlet
(9) Filter element (Microfilter system)
(10) Dust extraction hose
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GEX 125-1 A
3 601 C87 0..
W
-1
min 12,000
-1
min 24,000
mm
mm
kg
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Application
For sanding down paint
For sanding undercoats (e.g. removing brush-
strokes, paint drips and paint runs)
For final sanding of primers prior to painting
a)
GEX 125-1 AE
3 601 C87 5..
–
250 250
7500–12,000
15,000–24,000
2.5 2.5
125 125
1.3 1.3
/ II
Grit
Coarse
Medium
100
120
Fine 180
240
320
400
Bosch Power Tools
●
/ II
40
60
80