Fronius Symo GEN24 6.0.Plus Operating Instructions Manual page 122

FAC inner
limit min
FAC alternat-
iv inner limit
max
FAC alternat-
iv inner limit
min
VAC outer
limit min
VAC long
time limit
Save as PDF
1
2
The PDF is created and displayed.
Note on autotest
The limit values are set in the menu area 'Grid Code'.
The access code for the 'Grid Code' menu area corresponds to the installer code (PROFI
menu) and is only made available to Fronius following a written request. An appropriate
application form is available from national technical support.
122
Test to check the minimum frequency
Test to check the maximum alternative frequency
Test to check the minimum alternative frequency
Test to check the minimum voltage in the phases
Test to check the 10 min average voltage in the phases
Click the 'Save as PDF' button.
Enter the file name in the input field and click on the 'Print' button.