NEC N8104-128 Installation Manual page 38

7. The following procedure is put into effect every team type to make a team.
Smart Load Balancing™ and Failover(Without Standby Member)
1) Check [Do not configure a standby member].
2) Click "Next".
1) Check
Smart Load Balancing™ (Auto-Failback Disable)( With Standby Member)
1) Check [Use the following member as a standby member].
2) Select the standby member from the list of adapters.
3) Check [Enable Auto-Failback Disable mode].
4) Click "Next".
1) Check
3) Check
Important
Make sure "Enable Auto-Failback Disable mode" set when edit the team.
- 38 -
2) Click
2) Select
4) Click
April 2011 (3rd Edition)
808-882328-264-C