Installing The Cooktop Unit - LG LSCG306ST Service Manual

INSTALLATION INSTRUCTIONS

INSTALLING THE COOKTOP UNIT

1 . LOCATE ELECTRICAL OUTLET AND GAS SHUT-OFF
VALVE BENEATH CABINET
NEVER RE-USE OLD FLEX CONNECTORS.
Install a manual shut-off valve in the gas line in an easily
accessible location outside the cooktop. Be sure you know
how and where to shut off the gas supply to the cooktop.
Install the electrical outlet 12" below the countertop.
2 . INSERT COOKTOP INTO CUTOUT
Insert the cooktop centered into the cutout opening. Be
sure the front edge of the countertop is parallel to the
cooktop. Make final check that all required clearances are
met.
3 . LOCATE RETAINER BRACKETS
Remove the retainer brackets from the literature package.
4 . INSTALL THE RETAINER BRACKETS
Install the retainer brackets to the bottom of the cooktop
unit. then snug the bolts against the bottom of the
countertop as shown
NOTE : The retainer brackets MUST be installed to meet
local codes or, in their absence, with the National
Electrical Code ANSI/NFPA No. 70, latest edition.
LGE Internal Use Only -13- Copyright © 2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Retainer
brackets