Connecting Devices - LG HU70LAB.AUS Owner's Manual

38

CONNECTING DEVICES

You can connect various external devices to the projector.
Connecting the Antenna or Cable
To watch TV using an indoor/outdoor antenna, connect a wall terminal and the
antenna port of the projector using an RF cable (75 Ω).
You can watch terrestrial or cable (analog, digital) TV.
Optional Extras
NOTE
•
Make sure not to bend the copper wire of the RF
cable (75 Ω). Turn the input jack to the right to
fasten it.
• Ensure you use a standard coaxial cable (75 Ω,
sold separately) when connecting to the projector
input.
• For better image quality in locations where signal
strength is low, purchase and install a signal
amplifier (booster).
• A signal splitter is required if you want to use two
or more projectors through one antenna.
• If you have any problems when installing the
antenna, please consult a suitable retailer or the
store where you purchased the antenna.
Copper wire