Table of Contents
Advertisement
(4) Assemble the DP and sheet.
(5) Assemble the Panel and Guide Panel(use adsorber).
* Assemble the upper left/right first and assemble the bottom left/right.
* Press the Guide Panel to attach the Cover Bottom and Pad.
(6) Assemble the Guide Panel hook.
(7) Tighten the screws from bottom side(7ea) of Guide Panel.
* Make sure it is assembled on the sheet hangers(Up/Left/Right/Down)
* There is chamfer in the upper left corner of the DP.
* Remove the fixed tape first, then assemble the Case Top
- 32 -
Copyright ©
Only training and service purposes.
D/P
Down
LG Electronics Inc. All rights reserved.
Advertisement
Table of Contents
