Philips AZ1120 User Manual page 11

Selecting a different track
During playback, you can use the SEARCH keys to select a
particular track.
– If you have selected a track number in the stop or pause
position, press PLAY•PAUSE 2; to start playback.
• Press SEARCH § once for the next track, or press repeatedly
until the desired track number appears in the display.
• Press SEARCH ∞ once to return to the beginning of a current
track.
• Press SEARCH ∞ more than once for a previous track.
Finding a passage within a track
1. Press and hold down SEARCH ∞ or §.
– The CD is played at high speed and low volume.
2. When you recognize the passage you want, release SEARCH.
CD MODE: SHUFFLE and REPEAT
The CD MODE button allows you to select 4 different play
modes. The modes can be selected or changed during playback.
– SHUFFLE - all tracks are played in random order.
– SHUFFLE REPEAT ALL
- repeats the entire CD in random order.
– REPEAT - plays the current track continuously.
– REPEAT ALL - repeats the entire CD
1. During playback, select your play mode by pressing CD MODE
once or more until the desired play mode is shown.
– You can use SEARCH ∞ or § to skip tracks during
CD MODE playback.
2. To return to normal playback press the CD MODE until the
SHUFFLE/ REPEAT modes is no longer shown in the display.
– You can also press STOP 9 to quit the play mode.
CD MODE: Programming track numbers
You may store up to 20 tracks in the desired sequence. If you like,
store any track more than once.
1. In the STOP position, press SEARCH ∞ or § for your desired
track.
2. When your chosen track number appears, press CD MODE
once to store the track.
– The display shows 'P' briefly and '
selected track number.
3. Repeat steps 1. and 2. to select and store all desired tracks in
this way.
' followed by your
PROGRAM
CD PLAYER
PROGRAM
CD
11