Cd Player - Philips AZ1030 User Manual

Playing a CD
1 Set the POWER control to CD.
2 Press / OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
™ The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the 2; button to start CD play.
™ Display indication: the current track number.
5 Press the 9 button to stop CD play.
™ Display indication: the total number of tracks.
You can pause CD play by pressing 2;. Continue CD play by
pressing the button again.
™ Display indication: the current track number (flashing).
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER control.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows E or no. (See
"TROUBLESHOOTING".)
If you press 2; and there is no CD inserted, the display
shows no.
Environmental information
All redundant packing material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packing materials, dead batteries
and old equipment.

CD PLAYER

9