Panasonic DP-UB820 Owner's Manual page 12

Enjoying audio with an amplifier connected to the OPTICAL/2ch AUDIO OUT/7.1ch AUDIO OUT
terminal
Setting
Set the following items in the setup menu (
≥ Set "HDMI(VIDEO) Output Mode" to "Auto ( Video Only / Video+Audio )". (
≥ Set "HDMI(AUDIO) Output Mode" to "Audio Only". (
≥ To enjoy audio with an amplifier connected to the OPTICAL terminal:
Set "Audio Output" to "Off" in "Advanced Settings". (
≥ To enjoy audio with an amplifier connected to the 7.1ch AUDIO OUT terminals:
Set "Analog Audio Output" to "7.1ch". (
≥ To enjoy audio with an amplifier connected to the 2ch AUDIO OUT terminals:
Set "Analog Audio Output" to "2ch (Downmix)". (
OPTICAL (DIGITAL AUDIO OUT)
2ch AUDIO OUT (Analog AUDIO OUT)
Connect terminals of the same color.
(Audio is not output from HDMI OUT terminal.)
7.1ch AUDIO OUT (Analog AUDIO OUT)
Set the speaker presence and size according to your environment. (
(Audio is not output from HDMI OUT terminal.)
Cable connections
A Front speaker (L/R)
B Surround speaker (L/R)
C Center speaker
Getting started
29):
29)
30)
31)
31)
Optical digital cable
Audio cable
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
D Subwoofer
E Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
- 12 -
29)
OPTICAL IN
Amplifier/receiver
L
AUDIO IN
R
Amplifier/receiver
31)