Advertisement
Quick Links
Advertisement
Related Manuals for LAZY MAISONS LM-JBS2
Summary of Contents for LAZY MAISONS LM-JBS2
- Page 1 LAZY MAISONS HEIGHT ADJUSTABLE TABLE STRAIGHT 2 STAGE T LEG BASE LM-JBS2 Model Number :...
- Page 2 2. When moving tables, please lift the tables, do not drag or tilt the table on one leg as misalignment may occur. 3. Check that the load on the table does not exceed limits (80kg maximum on straight ).
-
Page 4: Installation Steps
Installation Steps Step1 Step 3 Stretch D crossbeams to where you think it is ,then use I(12) wood screws,4.8 mm through H Rubber Wsaher to secure G Longitudinal Beams and D crossbeams to worksurface as shown.Repeat on other Step 2 Step 2 side. - Page 5 Insert N Pressure Retainer Lever into D Crossbeam and insert N pin into N Pressure Retainer Lever, Column Leg Crossbeam...
- Page 6 Step10 Step7 Attach B feet to A column leg with C (8) socket button head bolts, M65. Tighten bolts securely.Repeat Secure J Control Box in the desired location with I (2) Wood Screw,M4.8×19. on other side. Step8 Secure L Display in the desired location with M (2) Wood Screw,M3.5×20 with washers. Step9 Use Q Wood Screw,M3.5×16 and P Sticky Card,or R (4)Wire Clips to secure wires below the worksurface as shown.
- Page 8 2) Set Memory Position 5) Set Minimum Height 1. Use & buttons to adjust the table. 1. Use & buttons to adjust table to desired minimum height. 2. Press S, then press button 1 or 2 or 3 or 4 within next 3 seconds to set height for that #. 2.
-
Page 9: General Tips
roubleshooting 2 stage Error Code Cause Solution Explanation Check the cable connections between leg and computer. Reset Connection ssue he leg is disconnected rom the control box. display. If problem persists contact ustomer ervice. Let motor rest or 10 min. hen try again. Continous peration Continous operation or 5 min.
Need help?
Do you have a question about the LM-JBS2 and is the answer not in the manual?
Questions and answers