LG QNED96 Series Owner's Manual page 9

Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device's
connection, refer to the manual provided with
each device.
HDMI
• When connecting the HDMI cable, the
product and external devices should be
turned off and unplugged.
• Supported HDMI Audio format (Depending
on model):
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz /
44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz /
192 kHz)
Note
• If the device connected to Input Port also
supports HDMI Deep Colour, your picture may
be clearer. However, if the device doesn't
support it, it may not work properly. In that
case, change the TV's [HDMI Deep Colour]
setting to off.
• → → [General] → [Devices] →
[HDMI Settings] → [HDMI Deep Colour]
• Use a certified cable with the HDMI logo
attached.
• If you do not use a certified HDMI cable, the
screen may not display or a connection error
may occur.
• Recommended HDMI Cable Types
- Ultra High Speed HDMI
less)
Connections
/™ cable (3 m or
®
USB
Some USB Hubs may not work. If a USB device
connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
(Depending on model)
Note
• For an optimal connection, HDMI cables and
USB devices should have bezels less than
10 mm thick, 18 mm width and 8 mm a
wire diameter. Use an extension cable that
supports
memory stick does not fit into your TV's USB
port. (Depending on model)
IR Blaster
Control the set-top box (cable/satellite/IP/OTT),
Blu-ray/DVD player, soundbar, game consoles,
etc., using the IR Blaster. (Depending on
country) (Depending on model)
Note
• Connect the IR Blaster cable to the TV's IR
Blaster port.
• Use universal control settings to control the
device.
• Secure the IR Blaster with the 3M tape
provided.
if the USB cable or USB
9