Satellite Dish - LG QNED96 Series Owner's Manual

Antenna/Cable
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
• If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
• An antenna cable and converter are not
supplied.
• For a location that is not supported with Ultra
HD broadcasting, this TV cannot receive Ultra
HD broadcasts directly.
Turning on the TV
You can simply operate the TV functions, using
the button.
Power On (Press)
Power Off
Menu Control (Press
Menu Selection (Press and Hold
1) All running apps will close, and any recording
in progress will stop. (Depending on country)
2) You can access and adjust the menu by
pressing the button when TV is on.
3) You can use the function when you access
menu control.
8
Starting TV
1) (Press and Hold)
2) )

Satellite dish

Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
(Depending on model)
Note
• If the TV is turned on for the first time after it
was shipped from the factory, initialization of
the TV may take a few minutes.
• Your TV's OSD (On Screen Display) may differ
slightly from that shown in this manual.
• The device must be easily accessed to a
)
3)
location outlet near the access. Some devices
are not made by turning on / off button,
turning off the device and unplugging the
power cord.