Page 1
COMMERCIAL INFORMATION FOR THE CONSUMER INSTALLATION, USE AND MAINTENANCE INSTRUCTION SL51 fresco 1200 - SL35 fresco 1200 SL53 excel 900 - SL7 900 - SL7 1200 - SL19 900 SL22 900 - SLCR 83 - SL_EM41 - SLTC53 120 SLTC-EM53 90 - SL127 - SL89 - SL EM 2 900 TECHNICAL INFORMATION TYPE: FSLA-FSLB-FSLC-FSLD...
Page 3
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
Page 4
CONTENTS Warnings Uses Installation Working Maintenance...
Page 5
* Before carrying out any cleaning or main- WARNINGS taining operations, the appliance needs to be removed from the electric grid. If the ap- pliance is not provided with a non-separable flexible cable and plug, or with another de- “This appliance is not intended for use by vice ensuring omnipolar disconnections from persons (including children) with reduced the grid, with an opening distance between...
Page 6
Installation SL89 INSTALLATION After you did the drills on the wall, as reque- sted on the preceding chapter (installation), install the dowel inside the holes and insert two screws inside the two holes on the upper part. Do not tighten the screws completely, Before installing the appliance, make sure but leave about 2 mm.
Page 7
Filtering version WORKING * In the filtering version the air deviator is fixed through the screws supplied (Fig. 9), by using the holes which are on the back of the upper telescopic section. Connect the flange of the appliance with the air deviator through an ap- Mod.
Page 8
* To replace the halogen lamps, remove first MAINTENANCE the glass-blocking ring (Fig. 11A), by leve- ring with a screw-driver and thus removing the opaque glass (Fig. 11B) - when perfor- ming this operation hold the opaque glass carefully. Remove the lamp (Fig. 11C) without * An accurate maintenance guarantees good touching it with uncovered hands.
Need help?
Do you have a question about the SL-EM41 and is the answer not in the manual?
Questions and answers