Table of Contents
Advertisement
INSTALLATION OF THE VARIABLE TERMINATION KIT
Fig. 4.12: Routing around roof eaves
30
Routing around roof
eaves
When routing the variable
termination kit around the roof eaves,
additional lengths of M8 threaded
bar will be required for the support
brackets. Threaded bar can be
purchased from most local merchants.
• Change the bird protection grille
from the 87° elbow to the
extension installed at the end.
When using the 87° elbow, put in
the seal from the extension.
• The extension installed at the end
must be fixed to the wall using 2
support clips with a minimal
distance of 400 mm.
Advertisement
Table of Contents
