Opening And Closing The Bonnet - Volvo XC60 Owner's Manual

Twin engine
Hide thumbs Also See for XC60:
Table of Contents

Advertisement

MAINTENANCE AND SERVICE

Opening and closing the bonnet

The bonnet can be opened using the handle in
the passenger compartment and a handle under
the bonnet.
Open the bonnet
Pull the handle near the foot pedals to
release the bonnet from its fully closed posi-
tion.
626
Sweep from left to right in the opening under
the bonnet, move the handle up and to the
side to release the bonnet from the bonnet
lock's catch and lift the bonnet.
Warning - bonnet not closed
When the bonnet is released, the warn-
ing symbol and the graphics in the
driver display will light up and an
acoustic reminder will sound. If the car
starts rolling, an acoustic warning signal will
repeat.
NOTE
If the warning symbol is lit or the warning sig-
nal is heard despite the bonnet being closed
properly, contact an authorised Volvo work-
shop.
Close the bonnet
1. Push the bonnet down until it starts to fall
from its own weight.
2. When the bonnet stops against the lock
catch, push the bonnet to close it completely.
WARNING
Risk of crushing! Ensure that the closing path
under the bonnet is not obstructed, otherwise
there is a risk of personal injury.
WARNING
Check that the bonnet locks properly when
closed. The bonnet must engage at both
sides audibly.
Bonnet not completely closed. The figure is schematic -
parts may vary depending on car model.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents