Sony Trinitron KV-XA21 Operating Instructions Manual page 10

Presetting channels (continued)
To change the color system setting
If the color is abnormal when receiving programs through the 8 (antenna) terminal
or the t (video input) jack.
(1) Press SELECT until "COLOR SYS" appears.
(2) Press + or – to select the appropriate
color system until the color is
optimal.
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until "MANUAL PROGRAM" appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To restore the skipped program number again
Preset the channel automatically or manually.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until "MANUAL PROGRAM" appears on the screen.
(3) Press + or – on the remote control once.
(4) Press to display "FINE" on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
10
Using Your New TV
Tip
• Normally set "COLOR SYS" to "AUTO".
Tip
• You can also use SELECT and
skip program numbers.
COLOR SYS: AUTO
AUTO
NTSC 4.43
2
+/– on the TV to preset channels and
PAL SECAM
NTSC 3.58