Table of Contents
Advertisement
OPERATION
36
There are three available positions for adjusting
the height of the upper rack to create more space.
Lowering the Rack
Hold the rack at the centre of each side to support
its weight. Then, push the button on each side to
release the rack and lower it to the lower position.
Raising the Rack
Lift the rack at the centre of each side until the rack
locks into place in the upper position. It is not
necessary to lift the lock levers to raise the rack.
Possible plate size according to the
upper rack position
Upper Rack
Position
Upper Rack
Upper
Middle
Lower
WARNING
• Before adjusting, ensure the rack is empty of all
dishes. Otherwise dishes may get damaged or
you may get injured.
NOTE
• Raise the upper rack without pushing the
buttons on each side. Pushing the buttons when
raising the rack will prevent the rack from
locking into position.
• To set the rack to the middle position, it may be
easier to lower the rack all the way down and
then raise each side of the rack individually until
it clicks into place.
• There is a 56 mm gain in height when the upper
rack is moved to the lower position.
• After adjusting the rack levels, check that the
spray arms are free to rotate.
• With the lower position of the upper rack, check
if the bottom part of upper rack including spray
arm is not disturbing items on the lower rack.
• When the upper rack is in the lower position,
push in the upper rack first, and the lower rack
later.
Plate Size (mm)
Lower Rack
215
300
243
272
271
244
Advertisement
Table of Contents
