Table of Contents
Advertisement
Available languages
Available languages
V1.0
2.
Press the on/off/selector switch to turn the LEDs on. Press again to select
the light intensity. The lower the intensity the longer the battery will last.
The battery duration is approximated and may vary.
You can use the work light while it is charging.
TABLE 1. OPERATING MODES
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Keep the tool handles or gripping surfaces clean and dry.
3.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
RECHARGING THE WORK LIGHT
1.
Check the indicator lights to determine if you need to recharge the
battery.
2.
Lift the waterproof cover.
3.
Insert the charging cable's USB-C plug into the USC-C port.
4.
Plug the USB plug into a power supply's USB port.
5.
The glowing LEDs will indicate the battery's charge level.
6.
Remove the charge cable and close the waterproof cover once the battery
is fully charged.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Page 7
LED SOLAR/USB RECHARGEABLE WORK LIGHT
Strong Light
Moderate Light
Dim Light
SOS Flashing Light
Off
www.princessauto.com / 1-800-665-8685
9103250
4 Hours
8 Hours
20 Hours
---
---
Advertisement
Table of Contents
