Daikin RXTM30R2V1B Installer's Reference Manual page 20

3 | Specific installer safety instructions
Installer reference guide
20
DANGER: RISK OF BURNING/SCALDING
Do NOT touch the compressor with bare hands.
Troubleshooting (see "15 Troubleshooting" [
DANGER: RISK OF ELECTROCUTION
DANGER: RISK OF BURNING/SCALDING
WARNING
▪
When carrying out an inspection on the switch box of the unit, ALWAYS make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.
▪
When a safety device was activated, stop the unit and find out why the safety
device was activated before resetting it. NEVER shunt safety devices or change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.
WARNING
Prevent hazards due to inadvertent resetting of the thermal cut-out: power to this
appliance MUST NOT be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly turned ON and OFF by the utility.
DANGER: RISK OF ELECTROCUTION
▪
When the unit is not operating, the LEDs on the PCB are turned off in order to
save power.
▪
Even when the LEDs are off, the terminal block and the PCB may be powered.
4
59])
RXTM-R_RXTP-R_ARXTP-R_RXTA-B
4P518023-11H – 2021.03
R32 split series