Table of Contents
Advertisement
ATTACHING THE STAND
Attaching the stand feet
To complete the stand feet installation you will require a cross head screw driver.
Screws that are included.
6 x
TV panel must be facing downwards.
1
Back/Shortest
Front/Longest
2
3
Detaching the stand
Remove the screws highlighted then remove the stand feet from the underside of the TV set.
4
5
6
1
2
3
6 x
4
5
6
1
2
3
6 x
Attaching the Stand
(fi g.1) Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage, then fi x
the stand feet shown.
(fi g.2) When the stand feet are
installed correctly the stand feet will
be longest at the front of the TV
and shortest at the back with the
feet pointing away from each other.
(fi g.3) When the stand feet are
in the correct position, secure the
stand feet to the underside of the
TV set using the 6 screws provided.
9
9
Advertisement
Table of Contents
