Table of Contents
Advertisement
User Code Digits
The 690/690F, 790/790F, and 791/793 keypads are compatible with XRSuper6, XR20, XR40, XR200, XR2400F, XR200-
485, and XR500 Series Command Processor™ Panels. The table shows the various panel types and required operating
modes for the arming/disarming feature as well as the appropriate code configuration (4 or 5 digits) for each panel.
Operation
Arms H/A
Disarms H/A
Arms A/P
Disarms A/P
Arms Area(s)
Disarms Area(s)
* During entry delay only.
Current Draw
Keypad
Voltage
690/690F
12 VDC Nominal
790/790F/791 12 VDC Nominal
793
12 VDC Nominal
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made by the user and not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specifications
Operating Voltage
Dimensions
Panel Compatibility
DMP Command Processor™ Panels
XRSuper6, XR20, XR40
XR200, XR200-485, XR2400F
XR500 Series, XR2500F
XRSuper6
XR20/XR40
4-digit
4-digit
4-digit
4-digit
N/A
N/A
4-digit
4-digit
N/A
N/A
N/A
4-digit*
Normal Standby
77mA
77mA + 1.6mA per active zone
92mA + 1.6mA per active zone
12 VDC Nominal
6.5" W x 5" H x 1" D
800-641-4282
www.dmp.com
Made in the USA
XR200
XR2400F
4-digit
4-digit
4-digit
4-digit
N/A
N/A
5-digit
5-digit
N/A
N/A
5-digit*
5-digit*
84mA + 2mA per active zone
120mA + 2mA per active zone
Listings and Approvals
• Underwriters Laboratories (UL) Listed
• California State Fire Marshal (CSFM)
• FCC Part 15
INT RUSI ON • FIRE • AC C ESS • NETWO RKS
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
XR200-485 XR500 Series
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5-digit
5-digit
Alarm
84mA
Advertisement
Table of Contents
