Timer Playback - Teac GF-600 Owner's Manual

Setting the Timer 2
7 Hold up or down the knob to set the stop time(hour), and press
the CLOCK ADJ button.
CH INTRO REPEAT SHUFFLE
TRACK MEMORY AUX
The "minutes" value starts flashing.
8 Hold up or down the knob to set the stop time(minutes), and
press the CLOCK ADJ button.
CH INTRO REPEAT SHUFFLE
TRACK MEMORY AUX
9 Press the DISPLAY button (or leave the unit for 5 seconds).
Now the timer setting is stored in memory.
28
REMAIN TIMER
CLASSIC
ON OFF
TAPE TUNER CD
ROCK
STEREO
POPS
3
FLAT
MHz
1 2
PLAY
kHz
REMAIN TIMER
CLASSIC
ON OFF
TAPE TUNER CD
ROCK
STEREO
POPS
3
FLAT
MHz
1
2
PLAY
kHz

Timer Playback

4
3
1 Set the start time and stop time (see 27 page).
2 Select a source by pressing the corresponding button.
< Prepare the source. When you select "TUNER", tune in a
station.
3 Press the TIMER button.
TIMER
CLASSIC
ON OFF
ROCK
STEREO
POPS
3
FLAT
MHz
1 2
PLAY
kHz
"TIMER" indicator appears on the display.
4
Press the POWER switch to turn the unit off (standby).
When "TAPE" is selected, press the PLAY button of TAPE
The unit will turn on and off at the specified time.
< The timer doesn't work when the unit is turned on manually.
< When you don't use timer, press the TIMER button to turn it off.
2
! or @ .