Philips JR24CDRW99 Install Manual page 7

Install Guide panels 10/3/02
3
Installation - Two Piece Power Cord
If your Jack Rabbit drive was packaged with a one piece Power
Cord, please move ahead to step 4. If your package contains a two
piece Power Cord; Plug the Power Cord end into the Power
Converter, then the mini plug from the Power Convertor into the
Jack Rabbit 12V DC plug. Plug the Power Cord into an AC outlet.
Power
Converter
Power Cord
to Power
Converter
8:21 AM Page 7
End of Power Cord plugged
into the Power Converter
Mini Plug to the 12V DC
Jack on the side of the
Jack Rabbit
Jack Rabbit
CD-RW Drive
Power Cord
to AC Outlet