Sony ILME-FX3 Help Manual page 267

Help Guide
Interchangeable Lens Digital Camera
ILME-FX3
SteadyShot Adjust. (still image/movie)
You can shoot with an appropriate SteadyShot setting for the attached lens.
MENU → (Shooting) → [Image Stabilization] → [
1
Menu item details
Auto:
Performs the SteadyShot function automatically according to the information obtained from the attached lens.
Manual:
Performs the SteadyShot function according to the focal-length set using [
Note
The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera
towards a subject, or when the shutter button has been pressed all the way down without stopping halfway.
When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [
SteadyShot Adjust.] to [Manual] and set [
SteadyShot focal length will display to the side of
When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [
focal length.
If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You
cannot switch the settings using the camera.
Related Topic
SteadyShot focal length (still image/movie)
Focal Length] to match the lens you are using. The current set value of the
(SteadyShot) icon.
5-025-869-11(2) Copyright 2021 Sony Corporation
267
SteadyShot Adjust.] → desired setting.
Focal Length]. (8mm-1000mm)
SteadyShot Adjust.] to [Manual] and set the