Connect With Ab1000; Recharging; Firmware Update - Zendure Supercharged ZDAB1000 User Manual

5.4 Connect with AB1000

An AB1000 can be stacked on and connected to another unit. The AB1000
batteries stacked onto one another do not require a Battery Cable for
connection.
Tips:
• It's recommended that AB1000 should be turned off before connection.
• Do not connect them during charging/discharging process.
• Do not touch the metal pins of the ports with your hands or other
objects. Gently clean them with a dry cloth when necessary.
• Battery Mounting Bracket is optional for fixing all the AB1000 units
securely.

5.5 Recharging

The AB1000 can be charged via PV Hub from the solar panel.

5.6 Firmware Update

1. When using your AB1000 for the first time, please connect it to PV Hub
to check and update to the latest firmware.
2. Zendure App over-the-air (OTA) update
Read the Zendure App user guide and access the download link here:
https://zendure.com/pages/download-center
Tips:
• Do Not turn off the device during the firmware update.
• Please update the firmware when the capacity is more than 20%, in
order to have enough power to complete the update.
Privacy Policy
By using Zendure Products, Applications and Services, you
consent to the Zendure Terms of Use and Privacy Policy,
which you can access via the "About" section of the "User"
page in the Zendure App.
EN
5