Option
Description
•
•
Wireless Radio
Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
Control
depending on the physical connection.
•
•
Wake on LAN/
Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
WLAN
LAN signal.
•
•
•
•
Default setting: Disabled
Peak Shift
This option enables you to minimize the AC power consumption during the peak power times of day. After you
enable this option, your system runs only in battery even if the AC is attached.
•
•
Advanced Battery
This option enables you to maximize the battery health. By enabling this option, your system uses the standard
Charge
charging algorithm and other techniques, during the non-work hours to improve the battery health.
Configuration
Primary Battery
Allows you to select the charging mode for the battery. The options are:
Charge
•
Configuration
•
•
•
•
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
Type-C connector
•
power
•
NOTE:
This feature is only functional when the AC power adapter is connected. If the AC power
adapter is removed during Standby, the system setup removes power from all the USB ports to
conserve battery power.
Enable USB Wake Support
Wake on Dell USB-C dock
Control WLAN Radio
Control WWAN Radio
Disabled
LAN Only
WLAN Only
LAN or WLAN
Enable peak shift (disabled)
Set battery threshold
Adaptive (default)
Standard — Fully charges your battery at a standard rate.
ExpressCharge — The battery charges over a shorter period of time using Dell's fast charging technology. This
option is enabled by default.
Primarily AC use
Custom
NOTE:
All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
7.5 Watts(selected by default)
15 Watts
System setup
47