Triplett HSDL300 User Manual

Heat stress/ wbgt datalogger

Advertisement

Quick Links

User Manual
HSDL300
Heat Stress/ WBGT Datalogger

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HSDL300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Triplett HSDL300

  • Page 1 User Manual HSDL300 Heat Stress/ WBGT Datalogger...
  • Page 2: Controls And Indicators

    Introduction Thank you for purchasing the Triplett HSDL300 Heat Index WBGT Datalogger. The HSDL300 meter measures air temperature, globe temperature, and humidity to give heat stress for using in control of physical activity in hot environment to limit the danger of...
  • Page 3 Icons and Symbols WBGT Wet Bulb Globe Temperature Black Globe Temperature Air Temperature RH/% Relative Humidity F Celsius/Fahrenheit Indoor (no sun) Outdoor (full sun) Auto Power Off Recording Maximum Minimum FULL Memory Full Low battery indicator Alarm indicator Hold Function...
  • Page 4 Function Buttons -Press power key to turn on/off the meter. When meter is powered on, APO displayed on LCD. -Press key to turn on the meter in non-APO mode. NO APO on LCD. -You will see the firmware version on the LCD for 1 second while power on.
  • Page 5 -In normal mode, long press SET key to enter setting mode. -In setup mode, Key is used for setting / save. -In logging standby status, press this key to start or stop. -In normal mode, press IN/ OUT key to switch the WBGT mode as Indoor or Outdoor.
  • Page 6: Operation

    Operation 1. POWER ON/OFF Press to turn on and turn off the meter. All indicators are shown on the LCD when power on, and then enter measuring mode. You will see the firmware version on the LCD for 1 second while power on. 2.
  • Page 7 3. ALARM / UNIT SETTING P1.0 WBGT alarm setting P1.1 alarm buzzar ON/OFF In normal mode, long press key to enter setup mode. (See below Fig.)When alarm is programmed as ON, appears on LCD. When the WBGT value reaches the alarm threshold, the icon and WBGT value will flash with continuous beeper sound per second.
  • Page 8: Data Logging

    P2.0 Unit setting P2.1 temperature unit switch Press up/down key to switch between C and F and then press key to confirm. 4. DATALOGGING Before each recording, connect with computer to setup (see page 8). While ready, long press till flashing on display.
  • Page 9: Datalogger Setup

    Datalogger Setup There is no need to install USB driver or software before operating logging function. Setup logger every time before you want to start logging function Connect to computer to setup Step1: Connect the logger with any windows computer. Computer will recognize logger as a CD-ROM and pop up new screen for configuration.
  • Page 10 Press keys to start logging Step1: Long press key for more than 1 second to activate the logger into standby status. You will see icon flashing on display. During icon is flashing, pressing key to start the logging. You will see REC icon flashes on display.
  • Page 11: Error Messages

    Error Messages Code Problem Solution 1. The value Check whether the sensor is is under installation correct. Put the range. meter in room temp. for 30 2. Improper minutes. If the error sensor messages still appear, send back for repair. installation.
  • Page 12: Specifications

    Specifications Temperature Range 32 to 122°F (0 to 50°C) Temperature Resolution 0.1°F/0.1°C Temperature Accuracy +/-1.8°F (0.6°C) Humidity Range 0.1 to 99.9%RH Humidity Resolution 0.1%RH +/-3%RH (@ 25°C, 10~90%RH) Other Humidity Accuracy +/-5%RH) Globe Temperature Range (Inside Black Ball) 32 to 176°F (0 to 80°C) Inside: +/-1.0°C (15 to 40°C) Others 5°C Globe Temperature...
  • Page 13 2.0” (H) x 1.25” (W) (50mm 2.0” (H) x 1.25” (W) (50mm LCD Size (H) x 32mm (W) LCD Size (H) x 32mm (W) Operating Operating Temperature 32 to 122°F (0 to 50°C) Temperature 32 to 122°F (0 to 50°C) Operating RH% Humidity <...
  • Page 14: Warranty

    Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (1) one year from the date of purchase.

Table of Contents