Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Triplett ACDL100
Summary of Contents for Triplett ACDL100
- Page 1 User Manual ACDL100 True RMS AC Voltage/Current Datalogger...
- Page 2 Introduction Congratulations on your purchase of the Triplett ACDL100 TRMS Voltage or Current datalogger. With this meter, you can monitor and log data over long periods of time and then easily transfer the data to a pc for viewing and evaluation. The LCD display provides real time data, Max/Min data and...
- Page 3 Description and Button Functions 1. LCD Description Normal record mode is selected Capture record mode is selected. Records the sine wave when the measure value exceeds Capture Detection level. Auto power off setting, the meter will automatically shuts off after 5mins without any button presses.
- Page 4 AC adaptor Jack ON/OFF Button MAX/MIN : Press the button one time to display the MAX (maximum) reading . Press again to display the MIN (minimum) reading. A third press will exit MAX/MIN mode. The meter will automatically exit MAX/MIN mode in 10 seconds if no button is pressed.
-
Page 5: Operation
Operation Install 4 fresh AAA batteries or connect the AC adaptor. Set-up the datalogger using the software provided. Connect the voltage test leads or the current probe to the meter and hen to the AC source to be measured. Press and Hold the START/STOP button for four seconds to start recording. -
Page 6: Software Introduction
Software Introduction Software can be downloaded from the Triplett Website here: Download Triplett Product Software — Triplett — Triplett Test Equipment & Tools After the software is installed, connect the datalogger to the PC by the USB cable. A USB Driver installation window will pop-up. Follow the directions to install the driver. -
Page 7: Specifications
Specifications Display Multi-function LCD Maximum data points 100,000 Channels Single channel, TRMS AC Voltage or Current Sample rate 1s to 24h selectable Transient capture >0.244mS Analysis software Windows 2000/XP/ Vista/7/8 Data output USB port Open input indication "LO" appears on the LCD Low battery indication Empty battery symbol appears on the LCD... -
Page 8: Warranty
Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (1) one year from the date of purchase.
Need help?
Do you have a question about the ACDL100 and is the answer not in the manual?
Questions and answers