Subscribe to Our Youtube Channel
Related Manuals for Moman H2
Summary of Contents for Moman H2
- Page 1 MOMAN Headset Helmet Intercom 2-Rider Kit User Manual Thank you for choosing MOMAN product. Please read this manual carefully before use and follow all instructions mentioned herein.
-
Page 2: Package List
Caring For Your MOMAN Product Please keep the product in a dry, clean, dust-free environment. Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage. Use only a soft and dry cloth for cleaning the product. -
Page 3: Product Introduction
Product Introduction ① On/Off Key ④ Charging Interface ⑦ Buckle Flap ⑩ Butterfly sticker ② Indicator Light ⑤ Knob ⑧ Speaker ⑪ Microphone ③ Function Key ⑥ Headset Interface ⑨ Headset Plug Operation 1. Power On/Off ON: Press the On/Off Key for 2 seconds. When you hear voice prompt, the blue indicator flashes twice. - Page 4 Bluetooth paired. (2) Turn on the Bluetooth function of the mobile phone, search and select “MOMAN H2” to connect and pair. The voice will prompt “Bluetooth connected”. ※ The distance between intercom and mobile phone should be within 1 meter.
- Page 5 3. Phone Control Answer the call: press the Function Key Automatic answer: When the phone calls and there is no operation after 8 seconds, it will answer the call automatically. Reject the call: press and hole the Function Key for 3 seconds until you hear the “beep”...
- Page 6 to the previous mode. ※ If the signal is weak indoor, you could try to turn on the FM radio near window or in the open area. ※ When FM radio is turned on and there is a phone calling, the machine will cut off FM radio automatically and connect to the mobile phone.
-
Page 7: Installation
Installation 1. Method 1: Install with Back Clip ① Use the screwdriver to loosen the screws of the back clip so that it can open to a proper extent. ② Open the helmet liner, insert the clip into the right position on the left side of the helmet and tighten the screw. - Page 8 Method 2: Install with Velcro Clip Separate the hook and loop fasteners. First stick the hook onto the Velcro clip; choose the right installation position on the helmet and stick the loop to the position. Install the intercom onto the Velcro clip. The installation of speakers can refer to the description above.
- Page 9 2. How to Remove the Intercom from Helmet First unplug the headset, then press the fixed buckle in the middle of the back clip with one finger (push towards the side of the helmet), so that the back clip hook is detached from the intercom, and push the intercom upwards to let it slide out of the back clip smoothly to complete the disassembly.
-
Page 10: Specifications
Installation 1. Before using the Bluetooth intercom, please use the attached charging cable to charge the intercom. The small type-C interface on the charging line is connected to the USB charging interface of the Bluetooth intercom, and the large USB connector on the charging cable is connected to the following charging interface for power supply: A. - Page 11 Notes 1. If you do not use intercom for up to one month or more, please charge the intercom once every two months in order to protect the lithium battery; 2. The storage temperature of this product is -20 ℃ to 50 ℃ , and do not store in the environment with too high or low temperature, otherwise, the service life of the product will be affected;...
- Page 12 Moman (UK) Limited Unit 25 Basepoint Business Centre, Aviation Park, West Christchurch, United Kingdom BH23 6NX www.momanx.com @MomanGlobal https://moman.co/youtube...
Need help?
Do you have a question about the H2 and is the answer not in the manual?
Questions and answers