Samsung DW80CG545 Series User Manual page 29

Table of Contents

Advertisement

04 Lower Rack
05 Sanitize
06 Hi-Temp Wash
07 Lock (3 sec)
08 Smart Control
09 Display
DW5000C_DW80CB507012AA_DD68-00261A-00_EN_FULL.indd 29
If selected, only the lower rack nozzle is activated to reduce both
the cycle time and power consumption. Use this cycle to wash a
small load of dishes or glasses in the lower rack. To wash heavily
soiled items, select the Storm Wash+ option.
With the Sanitize option selected, the water temperature is
increased to 167 ˚F (75 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks
when the water temperature reaches the sanitary temperature
(over 155 ˚F (68 ˚C)), and then remains illuminated until the Sanitize
option ends.
When you open the door or press the Power button, the "Sanitize"
lamp turns off.
NOTE
Only Normal cycle with the Sanitize option has been designed to
meet the requirements for soil removal and sanitization efficacy
in NSF 184. Certified residential dishwashers are not intended for
licensed food establishments.
For the Sanitize mode, the amount of detergent as 3/4 oz (20 g) in
Main wash dispenser and 1/3 oz (10 g) on the door for pre-wash
is used.
Raises the main wash temperature to improve cleaning for loads
containing tough, baked-on food.
Control Lock allows you to lock the buttons on the control panel
so children cannot accidently start the dishwasher by pressing the
buttons on the panel.
To lock and unlock the buttons on the control panel, hold the
Lock (3 sec) button down for three (3) seconds when the power
is On.
You can monitor and control the dishwasher remotely through
a Wi-Fi connection. To connect the dishwasher to your smart
phone for the first time, press and hold Smart Control. For more
information, see the "SmartThings" section on page 36.
Displays information about the current cycle including the cycle
time, remaining time, Delay Start settings, and other cycle-specific
information.
If a problem occurs during operation, an information code appears
with a warning sound. Refer to the information codes on page 52.
English
29
2023-03-24
12:21:10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents