Keystone Correction; Vertical And Horizontal Keystone Correction On Lc6285; Moving/Transporting The Projector; Preparation - Philips LC3631 User Manual

XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 18
Moving/transporting the
projector
Inserting the batteries in
the remote control
Philips Home Cinema Projector
3. Set up
Vertical and horizontal keystone correction on LC 6285
Press Keystone.
1
– The keystone correction screen appears.
Use Cursor Control up and/or down to widen/narrow the image in vertical direction.
2
3 Use Cursor Control left and/or right to widen/narrow the image in horizontal direction.
• This correction function also is accessible through the 'Keystone' option in the 'Set up' menu
of the On Screen Display (OSD) menu.

Preparation

y On-
Press the Standby button twice to put the projector in Power/Standby.
1
– The Standby indicator starts blinking red.
2 Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
Put the lens cap back in place to prevent dust, dirt or other contamination from harming or
3
damaging the front of the projector lens when moving the projector.
Note
Never place the projector on the side where the connections are located.

Moving/transporting the projector

The projector contains many glass and precision parts. If you need to transport the projector,
please follow these packing instructions to prevent accidental damage to the projector.
• When you are hand-carrying the projector, be sure to use a carrying case like the optional
softbag.
• When shipping the projector, use the original packaging material if possible. If you do not
have the original packaging, use equivalent materials, placing plenty of cushioning around the
projector.
• When transporting the projector as freight or checked luggage, first put it in a carrying case,
then pack it in a firm box, using cushioning around the case.
Push and slide the lid in the direction of the arrow.
1
2 Install two 'AA' batteries as indicated inside the battery compartment.
3 Replace the lid and snap it into place.
Note
The maximum range of the remote control is approximately 15 m (± 50 feet).
18
English User guide LC 6281 / LC 6285