Table of Contents
Advertisement
always mount the bicycle rack properly by
R
attaching to the ball head and the ball
neck guide pin, if possible.
when transporting four bicycles, always
R
use bicycle racks that have additional sup-
port on the ball neck guide pin.
use only bicycle racks approved by
R
Mercedes-Benz.
always observe the bicycle rack operating
R
instructions.
* NOTE Damage to or breakage of the trailer
hitch due to unsuitable or improperly used
bicycle rack.
Only use bicycle racks approved by
#
Mercedes-Benz properly as described
below.
* NOTE Increased risk of damage to prop-
erty due to folded-out ball neck
When the trailer is not coupled or the
#
bicycle rack is attached, fold in the ball
neck or, in the case of a fully electric
trailer hitch, retract the ball neck.
* NOTE The operating permit may be invali-
dated due to the illegal installation of
trailer hitches
The installation – including retrofitting – of a
non-folding or non-removable trailer hitch that
even partially conceals the license plate or the
lighting system is prohibited.
Observe the applicable legal regulations
#
for the installation of trailer hitches.
F297 0017 02
Driving and parking 437
Trailer hitch with additional guide pin
Depending on the bicycle rack's design, different
numbers of bicycles can be transported.
The following bicycle rack designs are possible:
When mounted by attaching to ball head 1,
R
the maximum load capacity is 75 kg. You can
transport up to three bicycles.
Advertisement
Table of Contents
