Functional Description; Typical Setup - We THYONE-I User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Thyone-I USB radio stick

2 Functional description

The Thyone-I USB radio stick consists of Thyone-I radio module along with a serial-to-USB
adapter that enables direct connection to any USB compatible device. An FTDI serial-to-USB
converter chip FT231X connects the USB interface to the UART pins of the integrated radio
module. Besides UART, additional digital GPIO pins (CBUS) are connected to the radio module
to provide special functions like reset. Figure 1 illustrates all the functional components of
Thyone-I USB radio stick.
Figure 1: Block diagram of the Thyone-I USB radio stick
For detailed function description of the Thyone-I USB radio stick, please refer
to the user manual of the underlying radio module Thyone-I [2].

2.1 Typical Setup

The Thyone-I USB radio stick offers either a Command API (default) or a Transparent Mode on
it's UART interface.
Two modules or USB dongles can communicate with each other if they share the same radio
configuration (radio profile and channel). Based on the network configuration, data can be
broadcast, multicast to a group or unicast to a specific module. The default module settings
are selected in such a way that an plug and play experience is possible by using 2 dongles and
the PC tool smart commander [1].
Order code 2611036021001
Version 1.3, April 2023 www.we-online.com/wcs
5