Recall Function; Bridge Function; "Keep Warm" Function - Rainford RBH-8622 BS Instructions For Use Manual

Recall Function

After switching off the hob (
• cooking stages of all cooking zones ( power )
• minutes and seconds of programmed cooking zone-related timers
• Heat up function
The recall procedure is following:
• Press the key [
• Then press the key [
The precedent settings are activated.

Bridge Function

This function allows to use the 2 cooking zones at the left at same time with the same features as
a single cooking zone.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop the bridge

"Keep warm" Function

This function allows to reach and maintain automatically a temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
• To engage, to start the function « Keep warm » :
Action
Zone selection
To engage
To stop
This function can be started independently on all the heating zones.
When the pan leaves the cooking zone of the "Keep warm" function remains active during
approximately 10 minutes.
The maximum duration of keeping warm is 2 hours.
), it is possible to recall the last settings.
]
] within 6 seconds
Control panel
Press display [
Press on the 2 cooking zones left
Slide on the "SLIDER "
[ 1 to 9 ] or display [
Press on the 2 cooking zones links
Control panel
Press display [ 0 ] selected
Press on key [
Press on display [
Slide on the "SLIDER"
50
]
]
] on the "SLIDER"
] selected
Display
[ 0 ] or [ H ] on the
4 displays
[ 0 ] appears on the front
zone
[ ∏ ] on the rear zone.
[ 1 to 9 ] or [ U ]
[ 0 ] or [ H ] on the 2 zones
Display
[ 0 ] to [ 9 ] or [ H ]
[ U ]
[ U ]
[ 0 ] to [ 9 ] or [ H ]