Optional Equipment Connection; Dolby Atmos - LG SPK8-W Owner's Manual

Optional equipment
connection
DOLBY ATMOS®
What is DOLBY ATMOS®?
Dolby Atmos gives you amazing experience you've
never before by overhead sound, and all the richness,
clarity, and power of Dolby sound.
For using DOLBY ATMOS®
y DOLBY ATMOS® is available only in HDMI IN and
ARC mode.
- To use DOLBY ATMOS® in ARC mode, your TV
has to support DOLBY ATMOS®.
y It is needed to set up an audio output on external
devices (Blu-ray disc player, TV etc.) to "No
encoding" such as "Bitstream", "Auto" or "Bypass" .
- If you can select audio output sampling rate, set
it to 192 kHz.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the external device such as
Blu-ray disc player, DVD player, etc.
2. Connect HDMI OUT (TV ARC) jack on the back of
the unit to HDMI IN (ARC) jack on the TV.
3. Set the input source to HDMI or OPT/HDMI ARC.
Press repeatedly F on the remote control or F on
the unit until the function is selected.
- If you select HDMI, you can hear the sound from
the external device. Select it when playing the
external device.
- If you select OPT/HDMI ARC, you can hear the
sound from your TV. Select it when watching
the TV.
You can see "DOLBY ATMOS"on the display
window if connecting normally between this
sound bar and your TV and DOLBY ATMOS
contents is played.
,
Note
y DOLBY ATMOS® supports 2.1 channel.
y If the sound bar does not have sound or the
video on TV is not smooth, the HDMI cable
may be the problem. Refer to the HDMI cable
checklist. (Page 18)
Connecting 19
2