Other Features - American Standard AccuLink Platinum 850 User Manual

Smart Optimization
The Platinum 850 Control is equipped with Smart
Optimization. By executing a series of blower
and active call on/off tests, Smart Optimization
will customize the Platinum 850 Control to each
unique environment and increase the accuracy
of the sensed indoor temperature and overall
system performance.
Smart Optimization is enabled by default and will
automatically execute approximately 18 hours
after initial power up. Smart Optimization takes
90 minutes to complete and during the process,
heating and cooling operations are disabled. The
screen will indicate that the Platinum 850 Control
is in Smart Optimization mode.
To delay Smart Optimization for an additional
18 hours, touch the Platinum 850 Control Screen
and hold for five seconds.
012-5061-05
To disable Smart Optimization altogether,
navigate to Home>Smart Optimization and
select Disable and press Apply.
To enable Smart Optimization, navigate to
Home>Smart Optimization and select Enable
and press Apply. Smart Optimization will execute
in approximately 18 hours.
To manually trigger Smart Optimization, first
disable, then re-enable the feature.

Other Features

Automatic Software Updates
When the Platinum 850 is connected to a Nexia™
smart home account, software updates will
occur automatically and do not require user
intervention.
NOTE: Internet services are required for
automatic software updates.
page 31