Prevail-Catv WT-1550-EM10 Operating Manual page 20

System supports the following commands:
help
ethcfg
settrap
community
List
Restore
Specific using as follows：
help
This command shows current application program version, program name and the
internal commands list of the system as follows:
You can also use the "help" command to show help information of other commands,
such as "help ethcfg"，ethcfg's help information appears as follows:
ethcfg
This command configures the Ethernet parameters, including IP address, subnet mask
WT-1550-EM10 1550nm external modulated optical transmitter operating manual
List internal commands of the system;
Configure the Ethernet operating parameters;
Configure the aim host IP address of the SNMP Trap;
Configure the SNMP group name;
List system default parameters or user updated parameters;
Restore the factory default values;
- 19 -