WT-1550-EM10 1550nm external modulated optical transmitter operating manual
Then you input your connection name, such as "SNMP38400",and choose the serial
port to connect with your equipment. As follows:
Press the "OK" button shows the configuration page of serial port. As follows:
Change the serial port configuration to 38400-baud rate, 8 data bits, no parity bit, 1
stop bit, no data flow control, press the "OK" button, you have set up the Windows
serial port Hyper Terminal.
You can click "filesave" menu to save this configuration of Hyper Terminal for
later using.
- 17 -