Advertisement
Quick Links
TL33709 Air Hose Reel
A. Handle
B. Hose Reel
C. 1/4" Air Line Inlet
D. Mounting Bracket
E. Quick Release Pin
F. 1/4" Air Line Outlet
G. 3/8" x 50' Air Hose
H. Manual Brake Pin Lock
I. 3/8" x 3' Lead-in Hose (not shown)
MODEL
NET WEIGHT
AIR INLET SIZE
AIR HOSE SIZE
MAX. AIR PRESSURE
AIR HOSE LENGTH
TL33710
15.8 lbs. (7.2 kg)
1/4" NPT (F)
3/8" (10MM)
300 PSI
50' (15.24M)
BACKSIDE
1
FIG. 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Costway TL33709
Summary of Contents for Costway TL33709
- Page 1 TL33709 Air Hose Reel FIG. 1 A. Handle B. Hose Reel C. 1/4" Air Line Inlet D. Mounting Bracket E. Quick Release Pin F. 1/4" Air Line Outlet G. 3/8" x 50' Air Hose H. Manual Brake Pin Lock I. 3/8" x 3' Lead-in Hose (not shown)
- Page 2 Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety The definitions below describe the level of severity equipment, al ways wear OSHA/MSHA/NIOSH approved, properly for each signal word.
- Page 3 WARNING: • Do Not Use oxygen or reactive gases; explosion may occur. • Do Not Exceed air pressure of 300 PSI. DANGER: RISK TO BREATHING (ASPHYXIATION) • Read all manuals included with this product carefully. Be thoroughly familiar with the controls and the proper use WHAT CAN HAPPEN HOW TO PREVENT IT of the equipment.
- Page 4 WARNING: RISK FROM FLYING OBJECTS WARNING: RISK OF INJURY OR BURSTING WHAT CAN HAPPEN HOW TO PREVENT IT WHAT CAN HAPPEN HOW TO PREVENT IT • Air tools can propel loose • Keep work area clean and free • Air powered equipment and •...
-
Page 5: Mounting Bracket
FEATURES LEAD-IN HOSE (not shown) The lead-in hose is 3/8" x 3' long and has a swivel connection on HANDLE one end to prevent the hose from twisting or kinking. This gets The plastic handle (A) has an internal swivel attached to the air line inlet (C). -
Page 6: Installation
INSTALLATION Pull out the quick release pin (E) and turn it Attach the mounting bracket to the wall as shown in Figure 2. clockwise or counter- Choose a mounting location that is free of electrical wiring or other clockwise 90 degrees, obstructions and is sturdy enough to support the weight of the hose insert the hose reel reel and hose as well as the force used to extend and retract it. -
Page 7: Operation
COMPRESSOR HOOK-UP To lock the hose reel, extend the hose to The hose reel includes a 3/8" x 3' lead-in hose for hooking up the the desired length, pull the pull ring of hose reel to your air source. Apply Teflon tape to the male threads the manual brake pin completely out of the lead-in house and thread the non swivel end into the air hose and turn either clockwise or counter-...
Need help?
Do you have a question about the TL33709 and is the answer not in the manual?
Questions and answers