Siemens KG56NHX3P Installation Instructions And Instructions For Use page 16

en
If the display shows oF, it was not
■
possible to establish a connection.
Enter the password again, ensuring
that it is spelt correctly.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator to the Home
Connect app
Once the connection between the
refrigerator and the home network has
been established, you can connect the
refrigerator to the app.
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is deactivated.
2. Press °C button repeatedly until the
displays PA (pairing = connect with
app) and oF are shown.
3. Press + button to connect the
appliance with the app.
The display shows an animation.
As soon as the refrigerator and the
app are connected, the display shows
on.
4. Open the app and wait until the
refrigerator is displayed.
Use Add to confirm the connection
between the app and the refrigerator.
If the refrigerator is not automatically
displayed, click on Add appliance in
the app and follow the instructions. As
soon as your refrigerator is displayed,
add it with +.
16
5. Follow the instructions in the app until
the process is complete.
The displays show PA and on.
■
The refrigerator has been
successfully connected to the app.
If the connection has failed, please
■
check whether the mobile device is
connected to the home network
(WLAN).
Then connect the refrigerator to the
app again.
When the display shows Er, reset
■
the Home Connect settings and
perform set-up again from the
beginning.
Verify signal strength
You should verify the signal strength if no
connection can be established.
1. Press the super button and the
lock button simultaneously to open the
Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press the lock button
again until the lock is deactivated.
2. Press the °C button repeatedly until
the display shows SI. In the second
display, a value appears between
0 (no reception) and 3 (full reception).
Note
The signal strength should be at least
2. If the signal strength is too low, the
connection could be interrupted. Place
the router and the refrigerator closer
together, ensure that the connection is
not disturbed by shielding walls or
install a repeater to strengthen the
signal.